Top 3 Reasons for Higher Cost Performance Hearing Aid Damage
November 07, 2022
Top 3 Reasons for Higher Cost Performance Hearing Aid Damage
From the results of research on Good Sales Hearing Aid in recent years, it is found that earwax blockage, dampness, and accidental drop impact are the three main reasons for damage to Good Sales Hearing Aid.
Earwax clogging is a major cause of damage to expensive receivers. Normally, when talking, chewing, and walking, most of the earwax will gradually vibrate and fall out of the ear canal due to vibration, but some of it will remain in the ear canal. If the earwax cannot fall out normally, the earwax can only go into the receiver hole of the machine, which will make the sound lighter in light, and seriously block the receiver and cause damage, which will bring unnecessary losses to the deaf.
Frequent and regular cleaning of the receiver hole requires the joint efforts of dealers and users. Never underestimate a small piece of earwax, which may bring you huge losses and inconvenience. Follow the steps in the manual to clean the earwax, which is not time-consuming but can save you a lot of maintenance costs.
One of New Design Hearing Aid's biggest enemies is water vapor. It is generally known that water vapor will enter and accumulate inside the hearing aid from the battery compartment door and the gaps of various adjustment buttons, affecting the internal wiring of the hearing aid, causing water vapor to accumulate in the cavity of the custom case, and corroding the movement and internal wiring. Therefore, in normal use, in addition to being careful not to allow moisture from the surrounding environment to enter the hearing aid, such as adjusting the hearing aid with wet hands or showering it with rain.
Generally, after taking a shower, it is inevitable that a small amount of water splashes into the ear canal. A little water in the ear canal of normal people will evaporate quickly, but if the deaf person wears the New Design Hearing Aid without drying it when there is water in the ear canal, the water will be completely blocked between the custom machine and the eardrum. In the ear canal space, the water turns into water vapor after being heated, enters the deep cavity of the receiver, and then gradually cools and accumulates into liquid water, which continuously soaks the extremely small parts in the receiver, damages the receiver, and produces abnormal sound at least. In severe cases, the receiver will be completely reimbursed.
It can be seen that it is very important to keep the ear canal dry. When the hearing aid is not in use, put it in a desiccant to absorb the moisture from the machine, which will give your hearing aid a very long service life.
Good Sales Hearing Aid is very afraid of falling like a quartz watch, because the components in the hearing aid are connected by very small wires, which are very easy to break after being impacted, especially the internal sound vibration reed of the receiver due to its own structure. And the thimble is very easy to shift and deform after impact, causing distortion or silence.
In the production process of Good Sales Hearing Aid, if the receiver falls from a height before packaging, the only way to deal with it is to scrap it, which shows that the receiver is not resistant to impact.
After the receiver is installed in the hearing aid case, although the impact resistance has been improved, it still needs to be attached great importance to prevent the impact from falling. Because of their small size, custom machines tend to slip out of your hands when putting them on or taking them off, so be careful about this.
